Instrument Functions
R&S
®
NGL200/NGM200
59
User Manual 1178.8736.02 ─ 05
Figure 6-18: Overview of trigger IO system
Table 6-3: Trigger-in signals
Trigger-in parameters
Source
Descriptions
Ext trigger Ch1
Ext trigger Ch2
If detected, corresponding trigger-out parameters
are triggered.
The ext trigger signal is low active (inverted logic).
Digital I/O IN1
If detected, corresponding trigger-out parameters
are triggered.
The Digital I/O IN1 signal is low active (inverted
logic).
Output channel 1
Output channel 2
Output
If respective channel output is turned on, corre-
sponding trigger-out parameters are triggered.
Trigger / Digital I/O
