Instrument Functions
R&S
®
NGL200/NGM200
74
User Manual 1178.8736.02 ─ 05
Figure 6-31: File manager dialog
4. Select the file that you want to copy or delete.
5. Select the required action in the file manager dialog.
.
Table 6-6: File manager action
Action
Description
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete the selected file.
6.14
Store and Recall
Upon power-up, the instrument loads the last stored settings from internal memory
location. Auto saved parameters are also applied during startup.
The R&S
NGL/NGM output states of all channels (Ch1, Ch2) are disabled when the
recall function is activated.
Auto saved instrument settings
Auto saved of the instrument settings are applied when any of the following parameters
are changed:
●
Chapter 6.16, "General Instrument Settings"
●
USB connection mode
●
Ethernet settings
In addition of the auto saved instrument settings, the following instrument settings are
stored or recalled in the internal memory:
●
Store and Recall
