background image

Putting into Operation

R&S

®

NGL200/NGM200

13

Getting Started 1178.8720.02 ─ 05

General data

Mains fuses

2 x IEC T4.0H 250 V

Operating temperature range

+5 

°

C to +40 

°

C

Storage temperature range

-20 

°

C to +70 

°

C

Humidity noncondensing

5 % to 95 %

Display

TFT 5

"

 800 pixels x 480 pixels WVGA Touch

Rack installation

R&S HZN96 rack adapter 2U (P/N: 3638.7813.02)

Dimensions (W x H x D)

222 mm x 97 mm x 436 mm (8.74

"

 x 3.82

"

 x 17.17

"

)

Weight

R&S NGL201
R&S NGM201

7.1 kg (15.65 lb)
7.2 kg (15.87 lb)

R&S NGL202
R&S NGM202

7.3 kg (16.09 lb)
7.4 kg (16.31 lb)

3.3

 

Unpacking and Checking the Instrument

Unpack the R&S

 

NGL/NGM power supply carefully and check the content of the

package.

Check the equipment for completeness using the delivery note and package
contents list for the various items.

Check the instrument for any damage and loose parts. If there is any damage,
immediately contact the carrier who delivered the instrument.

Packing material

Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.

Unpacking and Checking the Instrument

Summary of Contents for NGL-COM2A






























Reviews: