Instrument Functions
R&S
®
NGL200
57
User Manual 1178.8736.02 ─ 02.01
Table 6-3: DIO pin layout
Pin
Signal
Direction
Pin
Signal
Direction
1
Inhibit Ch1
Trigger in sig-
nal
9
Inhibit Ch2
Trigger in signal
2
Trigger Ch1
Trigger in sig-
nal
10
Trigger Ch2
Trigger in signal
3
In
Trigger in sig-
nal
11
Output Fault
Trigger out signal
4
Out1
Trigger out
signal
12
Out2
Trigger out signal
5
Gnd
-
13
Gnd
-
6
Gnd
-
14
Gnd
-
7
Gnd
-
15
Gnd
-
8
Gnd
-
1. Press [Settings] key.
The R&S
NGL200 displays the main menu window.
2. Select "Trigger" menu item to set the trigger-in parameter.
The R&S
NGL200 displays the "Trigger" dialog.
Figure 6-19: An example if Operation Mode is selected as Source
3. Select the "Source" to configure the trigger-in parameter.
for details of the trigger-in parameters.
4. Select "Enable" and set it "On" to enable the trigger-in setting.
5. Select "Back" to go back to "Device" menu.
6. Select "Digital Output" to configure the trigger-out parameter.
The R&S
NGL200 displays the "Digital Output" dialog.
Advanced Features
