Getting Started
R&S
®
NGL200
18
User Manual 1178.8736.02 ─ 02.01
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during transportation
and shipment can damage the instrument.
●
Always ensure that sufficient mechanical and electrostatic protection are provided
●
When shipping an instrument, the original packaging should be used. If you do not
have the original packaging, use sufficient padding to prevent the instrument from
moving around inside the box. Pack the instrument in antistatic wrap to protect it
from electrostatic charging
●
Secure the instrument to prevent any movement and other mechanical effects dur-
ing transportation
Delivery package
The package contents contain the following items:
●
R&S
NGL200 power
●
Four power cables
●
One printed Getting Started manual
●
One document folder containing a printed Basic Safety Instructions
4.1.4
Setting Up the Instrument
The R&S
NGL200 is designed for benchtop and rackmount.
4.1.4.1
Bench Operation
On a benchtop, the R&S
NGL200 can either lie flat or stand on its feet. As shown in
, feet on the bottom can be folded out to set the instrument in an inclined
position.
Figure 4-1: Operating positions
Putting into Operation
