Instrument Functions
R&S
®
NGL200
44
User Manual 1178.8736.02 ─ 02.01
Figure 6-7: Output delay dialog
4. Select the "Impedance", "Delay" and "Trigger" menu items to configure the required
values.
The R&S
NGL200 displays an on-screen keypad to set the value for output impe-
dance and output delay.
For setting trigger mode, the R&S
NGL200 displays a "Select Trigger" dialog to set
the trigger mode.
● Disabled: If triggered, the selected output channel is disabled.
● Output On: If triggered, the selected output channel is turned on.
● Output Off: If triggered, the selected output channel is turned off.
● Gated: If triggered, the selected output channel is gated.
5. Activate the "Enabled" menu item to activate the settings for "Impedance" and
"Delay".
The R&S
NGL200 displays the "Impedance" and "Delay" icon on the selected
channel status bar information.
Output delay
When the instrument output delay is activated, the front panel of the respective chan-
nel key (i.e [Ch1], [Ch2]) blinks in green and a "DELAY" red text is displayed at the
channel display area of the respective channel. See
.
These operating behaviour resume to normal after the delay time.
Activating the Channels Output
