Connecting the sensor
R&S NRP-Z27/-Z37
1169.3870.12
1.4
E-6
Connecting the power sensor module to the DUT
The power sensor modules have a male N connector (R&S NRP-Z27) or a male 3.5 mm connector
(R&S NRP-Z37) on their RF input and can thus be connected to any standard female N or
2.92 mm/3.5 mm/SMA connector, respectively. To connect the power sensor module to the DUT more
easily and without tilting it, relieve it by slightly lifting it.
R&S NRP-Z27/-Z37
R&S FSMR
POWER
SENSOR
RF INPUT
DUT
Fig. 1-1
Configuration with the R&S FSMR
Performing measurements
The R&S FSMR handles the power sensors modules in a manner similar to the sensors of the
R&S NRP-Z series. To call up the power meter functionality, first press the PRESET key and then the
PWR METER softkey. For further details on operation, refer to the operating manual for the
R&S FSMR.
