R&S NRP-Z27/-Z37
Remote Control - Commands
1169.3870.12 6.15
E-2
SYSTem:MINPower?
SYSTem:MINPower?
yields the lower test limit of the power sensor module. This query can be used to
determine a useful resolution for the result display near the lower test limit.
SYSTem:TRANsaction:BEGin
SYSTEM:TRANsaction:BEGin
marks the beginning of a sequence of setting commands between which
the parameter limits must not be checked. This prevents the display of error messages when a setting
command causes a conflict that is resolved by a subsequent setting command. See
SYSTEM:TRANsaction:END
.
SYSTem:TRANsaction:END
SYSTEM:TRANsaction:END
marks the end of a sequence of setting commands between which the
parameter limits must not be checked. After this command, the parameter limits are checked.
