Remote Control Commands
R&S
®
NRPxxS(N)
109
User Manual 1177.5079.02 ─ 10
Manual operation:
See
9.8.3
Setting Exclusion Time
In the burst average and the timeslot average modes, you can define a time period at
the beginning or at the end of an integration period, which is excluded from the mea-
surement result, as shown in
Figure 9-6: Effect of commands SENS:TIM:EXCL:STAR and SENS:TIM:EXCL:STOP
Remote commands:
[SENSe<Sensor>:]TIMing:EXCLude:STARt
...................................................................... 109
[SENSe<Sensor>:]TIMing:EXCLude:STOP
.......................................................................109
[SENSe<Sensor>:]TIMing:EXCLude:STARt
<exclude_start>
Sets a time that is to be excluded at the beginning of the integration period, see
Parameters:
<exclude_start>
Range:
0.0 to 1.0
*RST:
0.0
Default unit: Seconds
Manual operation:
See
See
[SENSe<Sensor>:]TIMing:EXCLude:STOP
<exclude_stop>
Sets a time that is to be excluded at the end of the integration period, see
Configuring Basic Measurement Parameters
