Product Description
R&S
®
RT
‑
ZD10/20/30
5
User Manual 1410.4550.02 ─ 05
1
Product Description
1.1
Key Features and Key Characteristics
The R&S
RT
‑
ZD10/20/30 is a differential probe with high input impedance. It is
used for differential voltage measurements from DC to 1.0
GHz, 1.5 GHz, and
3
GHz, respectively.
Differential probes can be used for single-ended and differential applications.
They are equipped with two high-impedance inputs and can measure the voltage
between any two test points. Unlike using single-ended probes, there is no need
to ensure that one of the test points is always at ground potential.
The comprehensive accessory set allows this probe to be connected to a wide
variety of devices under test (DUT). Provided with special features such as the
R&S ProbeMeter and the micro button, the R&S
RT
‑
ZD10/20/30 is designed to
meet tomorrow's challenges in probing.
The external attenuator R&S
RT
‑
ZA15 can be used to extend the input voltage
range of the R&S
RT
‑
ZD10/20/30. It is supplied with the R&S
RT
‑
ZD10 and is
available as optional accessory for the R&S
RT
‑
ZD20/30.
The probe is equipped with theRohde
&
Schwarz probe interface. It can be con-
nected to any Rohde
&
Schwarz instrument that is compatible with this interface.
When connected to the front panel, the probe is controlled by the oscilloscope's
software. Supported oscilloscopes are listed in the data sheet.
Using a specially developed adapter (see
Chapter 1.4.2, "Optional Accessories"
on page 13), the probe can also be connected to any other base unit.
Key Features and Key Characteristics
