Product Description
R&S
®
RT
‑
ZD10/20/30
8
User Manual 1410.4550.02 ─ 05
●
Inspect the accessories.
If the contents are incomplete or damaged, notify your Rohde
&
Schwarz ser-
vice center.
Accessories supplied with the device are listed in
1.3
Description of the Probe
The probe consists of the probe head for connection to the DUT, the probe box
for connection to the oscilloscope, and the probe cable.
1.3.1
Probe Head
The small and lightweight probe head is designed for easy handling and high-per-
formance measurements. The probe head is used for connecting the probe and
the DUT. Different accessories for the signal and ground sockets allow the probe
head to be connected to a wide range of DUTs.
(1) Positive signal socket
(2) Negative signal socket
(3) Ground socket
(4) Micro button
The accessories supplied for the probe head
Signal and ground sockets are compatible with
0.64
mm (25
mil) square pins and 0.6
mm to
0.8
mm (24
mil to 35
mil) round pins.
Spacing of signal sockets: 5.08
mm (200
mil).
Description of the Probe
