Product description
R&S
®
RT
‑
ZM
17
User Manual 1419.3128.02 ─ 05
Table 2-3: Optional adapters
Accessories
Items
Quantity
R&S
RT
‑
ZA9 probe box to N / USB adapter
The adapter connects the R&S
RT-ZM modular
probe to any other oscilloscope or any other
measurement instrument (e.g. a network or
spectrum analyzer).
Using the USB interface of the adapter, the
probe can be powered and controlled from any
conventional PC. However, full software func-
tionality is only provided by the supported oscil-
loscopes (see data sheet).
1
R&S
RT
‑
ZA50 probe interface extender
The adapter is a breakout box that leads out the
R&S probe interface to the following standard
connectors: USB-C for power and control, SMA
for signal and DC jack for auxiliary supply.
Together with the R&S
RT
‑
ZA51 probe to
3.5
mm adapter, it moves the R&S probe inter-
face closer to your test setup.
1
R&S
RT
‑
ZA51 probe to 3.5 mm adapter
The probe adapter has an R&S probe interface
and standard connectors USB-C, 3.5
mm and
DC jack. Using this adapter, you can power and
control your Rohde & Schwarz probe without an
appropriate Rohde & Schwarz oscilloscope.
Together with the R&S
RT
‑
ZA50 probe to
3.5
mm adapter, it moves the R&S probe inter-
face closer to your test setup.
1
2.4.3
Service accessories
To order accessories for servicing the probe, contact your Rohde
&
Schwarz ser-
vice center. The following accessories are available:
Accessories and items
