General Instrument Settings and Instrument Setup
R&S
®
SGT100A
254
User Manual 1176.8674.02 ─ 07
New Password ← Change User Password
Enter the new user password.
Confirm Password ← Change User Password
Enter the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Change Password ← Change User Password
Changes the password accordingly.
Change Security Password
Note:
It is highly recommended to change the default security password before con-
necting the instrument to the network.
The security password is for example required when changing the status of the USB
and LAN interface.
Old Password ← Change Security Password
Enter the currently used security password. The default password is '123456'.
New Password ← Change Security Password
Enter the new security password. The security password may contain decimal charac-
ters only.
Confirm Password ← Change Security Password
Enter the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Change Password ← Change Security Password
Changes the password accordingly.
Security Settings
Comprises the settings for enabling and disabling the USB and LAN interfaces. The
setting requires the entry of the security password and is only accepted after the
"Accept" button is pressed.
USB Device ← Security Settings
Enable/disable the USB interface.
Note:
The instrument does not recognize any device connected to the USB interface
when the interface is disabled.
LAN Connection ← Security Settings
Enable/disable the LAN interface.
Note:
It is not possible to access the instrument via LAN while the LAN connection is
disabled.
An enabled LAN connection is a prerequisite for the remote control of the instrument
via VNC, FTP or SAMBA.
Security Setting
