General Instrument Settings and Instrument Setup
R&S
®
SGT100A
260
User Manual 1176.8674.02 ─ 07
For more information on this topic, see also application note
.
You find all the remote control command sets supported by the R&S
SGT in a selec-
tion list.
The selected instrument also defines the identification string that is retrieved with query
*IDN?
. In addition to the preset values, you can enter a user-defined identification
string, for example to provide individual identification for each generator, like
'MY_R&S
).
As any other parameter, you can additionally change the remote control command set
to be emulated via the
command. However, once you have switched to an
emulation, the R&S
SGT specific command set is disabled, that means this command
is no longer effective. To return, you need to know the corresponding remote control
command of the simulated instrument.
Access:
► Select "SGMA-GUI > Instrument Name > Setup > Emulations".
Language
Selects the instrument whose remote command set is emulated by the R&S
SGT.
Remote command:
Identification Mode
Selects the way the instrument identification is performed.
"Automatic"
The "IDN String" and the "OPT String" are set automatically for the
instrument selected with the parameter
.
"User Defined" Enables the selection of user definable "IDN String" and "OPT String"
for the instrument selected with the parameter
Remote command:
Emulations
