Remote Control Commands
R&S
®
SGT100A
376
User Manual 1176.8674.02 ─ 07
Example:
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name
mcar1_2.wv
for the multi carrier wave-
form.
BB:ARB:MCAR:CLO
creates multi carrier waveform
mcar1_2.wv
.
The new multi carrier waveform is loaded.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CLOCk?
The command queries the resulting sample rate at which the multi carrier waveform is
output by the arbitrary waveform generator. The output clock rate depends on the num-
ber of carriers, carrier spacing and input sample rate of the leftmost or rightmost carri-
ers.
Return values:
<Clock>
float
Range:
400 to Max
Increment: 1E-3
Example:
BB:ARB:MCAR:CLOC?
queries the ARB multi carrier output clock rate.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CREate
Creates a multi carrier waveform using the current settings of the carrier table. The
multi carrier waveform is saved into the file defined with command
SOUR:BB:ARB:MCAR:OFIL
. The file extension is
*.wv
.
Example:
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:MCAR:OFIL 'multi_wv1'
defines the file name
multi_wv1.wv
for the multi carrier wave-
form.
BB:ARB:MCAR:CRE
creates multi carrier waveform
multi_wv1.wv
.
Usage:
Event
Manual operation:
See
SOURce Subsystem
