Remote Control Commands
R&S
®
SGT100A
426
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe
<State>
Activates the specified analog I/Q output.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
SOURce:IQ:OUTPut:ANALog:STATe ON
Activates the output of the analog I/Q signal on the I/Q OUT 1
connectors.
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:PRESet
Sets the default settings (
*RST
values specified for the commands).
Not affected are:
●
The state set with the command
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe
.
●
If
SCONfiguration:EXTernal:PBEHaviour 1
, the I/Q ouptput type set with
the command
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:CATalog?
Queries the files with I/Q output settings in the default directory. Listed are files with the
file extension
*.iqout
.
Return values:
<Catalog>
"<filename1>,<filename2>,..."
Returns a string of file names separated by commas.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:STORe
<Filename>
Stores the current settings into the selected file; the file extension (
*.iqout
) is
assigned automatically.
Setting parameters:
<Filename>
"<filename>"
Filename or complete file path
Usage:
Setting only
Manual operation:
See
SOURce Subsystem
