Signal Generator Settings
R&S
®
SGT100A
113
User Manual 1176.8674.02 ─ 07
External Delay Unit
Determines whatever the trigger delay is expressed in samples or directly defined as a
time period (seconds).
The parameter displays the delay converted in time.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:DELay:UNIT
Trigger Delay
Sets the trigger signal delay in samples on external triggering. his enables the
R&S
SGT to be synchronized with the device under test or other external devices.
The parameter displays the delay converted in time.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:DELay
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:TDELay
Actual Trigger Delay
Displays the time (in seconds) an external trigger event is delayed by.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:RDELay?
Trigger Inhibit
Sets the duration for inhibiting a new trigger event subsequent to triggering. The input
is to be expressed in samples.
In the "Retrigger" mode, every trigger signal causes signal generation to restart. This
restart is inhibited for the specified number of samples.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:INHibit
7.1.3.2
Multi Segment Waveform Options
The section "Multi Segment Waveform Options" of the menu is only displayed if a multi
segment waveform is loaded.
The section comprises the settings necessary to adjust the trigger for the switch
between the segments of a multi segment waveform. The parameters displayed
depend on the selected trigger source.
Current Segment
Indication of the waveform segment (segment filename and index) that is currently out-
put.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
Baseband
