Remote Control Commands
R&S
®
SGT100A
371
User Manual 1176.8674.02 ─ 07
to the center RF frequency shows no phase jump assuming that the carrier is unmodu-
lated.
●
For odd number of carriers:
RoundedCarrierSpacing=1/OutputSignalDuration* round(CarrierSpacing * Output-
SignalDuration);
●
For even number of carriers:
RoundedCarrierSpacing=2/OutputSignalDuration*round(0.5 *CarrierSpacing * Out-
putSignalDuration);
Parameters:
<Spacing>
float
Range:
0.0 to 120E6
Increment: 0.01
*RST:
0
Default unit: Hz
Example:
BB:ARB:MCAR:CARR:SPAC 10 MHz
sets a carrier spacing of 10 MHz.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:CONFlict?
Queries carrier conflicts. A conflict arises when the carriers overlap.
Return values:
<Conflict>
0 | 1 | OFF | ON
*RST:
0
Example:
BB:ARB:MCAR:CARR2:CONF?
queries the multi carrier conflict state.
Response:
0
no conflict has occurred.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:DELay
<Delay>
Sets the start delay of the selected carrier.
Parameters:
<Delay>
float
Range:
0 to 1
Increment: 1E-9
*RST:
0
Default unit: s
Example:
BB:ARB:MCAR:CARR15:DEL 5us
sets a start delay of 50 us for carrier 15.
Manual operation:
See
SOURce Subsystem
