File and Data Management
R&S
®
SMA100B
208
User Manual 1178.3834.02 ─ 03
5. Select "Reboot".
The system reboots. The enabled settings are active.
To enable file transfer via ftp
1. Select "System Config > Setup > Security > Security > LAN Services".
2. Enable "LAN Interface"
3. Enable "FTP"
4. Enter the "Security Password".
The default password is
123456
. For more information, refer to
"Managing the Security Settings"
5. Select "Accept".
To enable file transfer via SMB (samba)
1. Select "System Config > Setup > Security > Security > LAN Services"
2. Enable "LAN Interface"
3. Enable "SMB (Samba)"
4. Enter the "Security Password".
The default password is
123456
. For more information, refer to
"Managing the Security Settings"
5. Select "Accept".
To enable file transfer via USB
1. Select "System Config > Setup > Security > Security > General"
2. Enable "USB Storage"
3. Enter the "Security Password".
The default password is
123456
. For more information, refer to
"Managing the Security Settings"
4. Select "Accept".
9.9.2 Accessing the File System of the R&S
SMA100B via ftp
If the R&S
SMA100B is connected to a LAN, you can use file transfer protocol (ftp) to
access the file system and to transfer files from and to the instrument.
For information on how to set up a LAN connection, refer to:
●
Chapter 2.1.3, "Setting Up a Network (LAN) Connection"
●
Chapter 11, "Network Operation and Remote Control"
How to Transfer Files from and to the Instrument
