General Instrument Functions
R&S
®
SMA100B
222
User Manual 1178.3834.02 ─ 03
Settings:
Display Level as Voltage of EMF
............................................................................... 222
Power-On State
Determines the RF signal output state when the instrument is switched on.
You can disable the RF output signal in general, or start it in the same state as it had
been when it was switched off.
Remote command:
Display Level as Voltage of EMF
Activates display of the signal level as voltage of the EMF (no-load voltage).
If disabled, the level is displayed as a voltage over a 50 Ohm load.
Note:
The value is not affected by an instrument preset (PRESET key or
*RST
) and the
"Save/Recall" function. It is reset only by factory preset.
Remote command:
10.2 Organizing Frequently Used Items as Favorites
The USER key is a key with customizable function. Per default, pressing the key opens
the "User Menu" but you can add or remove actions, too. You can add actions to be
executed or function to be accessed upon pressing this key.
User Menu and User Key
These two functions work similar to the favorites function of browser or other programs.
They allow you to create a list of frequently used actions or to group frequently used
settings in one single dialog.
Possible applications
The USER key is useful in the following situations:
●
There are functions or tasks you have to perform in a defined order but they are
distributed among several dialogs
●
There are functions or tasks you have to perform more frequently than other but
they are not accessible via a front panel key.
●
The required functions are grouped in a dialog that is not directly accessible from
the blocks on the home screen.
●
Your task involves the frequently loading and executing of certain SCPI scripts.
Refer to
Chapter 11.14, "How to Record / Create SCPI Lists"
information on how to create an SCPI script.
●
A quick access to saved setups is required.
Organizing Frequently Used Items as Favorites
