General Instrument Functions
R&S
®
SMA100B
239
User Manual 1178.3834.02 ─ 03
"SCPI over LAN"
Activates access over LAN to control the instrument remotely, by
using SCPI (Standard Commands for Programmable Instruments)
commands.
See also
"Starting a remote control session over LAN with R&S VISA"
"VNC"
Activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to control
the instrument remotely.
See also
Chapter 11.16, "How to Set Up Remote Operation via VNC"
"SSH"
Activates access via SSH (Secure Shell), a network protocol for
secure data communication.
"HTTP"
Activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
Activates access via FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
See also
Chapter 9.9.2, "Accessing the File System of the
"SMB (Samba)"
Activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
See also
Chapter 9.9.3, "Accessing the R&S
"Avahi (Zeroconf)"
Activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
"Software Update"
Allows updating the software.
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is
123456
.
Note:
●
We recommend that you change the default security password before connecting
the instrument to the network.
●
The security settings are not assigned until you select the "Accept" button.
Accept
Applies the modified settings, provided the security password is entered and correct.
10.4.4 Password Management
Access:
► Select "System Config > Setup > Security > Security > Password Management".
Managing the Security Settings
