Network Operation and Remote Control
R&S
®
SMA100B
295
User Manual 1178.3834.02 ─ 03
c) User code generator
A file system ("SCPI Recording Export - Select User Code Template") dialog
opens.
Select your user-defined code template. The code template must have file
extension
*.expcodetmpl
.
3. Select "File..."
The "SCPI Recording Export - Select Output File" dialog opens.
4. Select "New" and assign a filename for saving the recorded list.
5. In the "SCPI Recording Export" dialog, select "Export".
Saves the recorded data either in ASCII format (plain SCPI), or in the correspond-
ing format of the used code template, and shows the SCPI list in the "File Content"
section.
11.16 How to Set Up Remote Operation via VNC
This section shows you some examples of the various possibilities to set up remote
operation.
●
Using a desktop system
–
Chapter 11.16.1.1, "Using a Web Browser"
–
Chapter 11.16.1.2, "Using a VNC Client Software"
●
Using a smart device
–
Chapter 11.16.2.1, "Using a VNC App"
–
Chapter 11.16.2.2, "Using a Web Browser with HTML5"
–
Chapter 11.16.2.3, "Special Mode QR Code "
Enabled direct control
The direct control of the instrument is not disabled and the instrument can be control-
led from the front panel and via the remote computer alternately.
11.16.1 Setting Up a Remote Operation from a Desktop System
11.16.1.1
Using a Web Browser
The R&S
SMA100B supports remote operation via VNC with any web browser, like
Windows Internet Explorer or Mozilla Firefox for instance, or alternatively, an HTML5
web browser.
To operate the instrument via a web browser remotely:
1. Install the
JRE (Java Runtime Environment)
on the remote computer.
How to Set Up Remote Operation via VNC
