Remote Control Commands
R&S
®
SMA100B
332
User Manual 1178.3834.02 ─ 03
:CSYNthesis:POWer:STEP:MODE
<Mode>
:CSYNthesis:FREQuency:STEP:MODE
<Mode>
Defines the type of step size to vary the frequency and level at discrete steps.
Parameters:
<Mode>
DECimal | USER
DECimal
Increases or decreases the level in steps of 10.
USER
Increases or decreases the value in increments, set with the
command:
:CSYNthesis:FREQuency:STEP
:CSYNthesis:POWer:STEP[:INCRement]
*RST:
DECimal
Example:
See
Chapter 12.7, "CSYNthesis Subsystem"
Manual operation:
See
:CSYNthesis:POWer:STEP[:INCRement]
<Increment>
Sets the step width of the rotary knob and, in user-defined step mode, increases or
decreases the level.
Parameters:
<Increment>
float
Range:
0 to 35
Increment: 0.01
*RST:
1
Example:
See
Chapter 12.7, "CSYNthesis Subsystem"
Manual operation:
See
:CSYNthesis:FREQuency:STEP
<Step>
Sets the step width of the rotary knob and, in user-defined step mode, increases or
decreases the frequency.
Parameters:
<Step>
float
Range:
0 to 14999E5
Increment: 0.001
*RST:
1E6
Example:
See
Chapter 12.7, "CSYNthesis Subsystem"
Manual operation:
See
CSYNthesis Subsystem
