Maintenance
R&S
®
SMA100B
491
User Manual 1178.3834.02 ─ 03
Timezone
Selects the timezone.
You can select the timezone according to the major cities on the respective continents.
Note:
By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
Remote command:
NTP Address
Sets the IP address or host name of the NTP server.
NTP is a network time protocol used for synchronizing all participating devices in a
data network.
You can select a high-precision time server to reduce the impact of varying network
delays.
Remote command:
Use Time from NTP Server
Activates clock synchronization of the network via the NTP protocol.
Remote command:
13.3.2 Check Front Panel
With the functions provided in this dialog, you can verify the functionality of the control
keys and the touchscreen.
For Instructions on how to perform the tests and the expected results, see
ter 13.3.2.2, "How to Perform the Front Panel Tests"
In case of malfunctions:
Contact the Rohde
&
Schwarz customer support, see
Chapter 14.6, "Collecting Infor-
Accessing the online help in the check front panel dialog or exiting via ESC
During the test, the actual functions of all keys are disabled, including the HELP and
the ESC keys.
13.3.2.1
Check Front Panel Settings
Access:
► Select "System Config > Setup > Maintenance > Check Front Panel".
Performing Maintenance Tasks
