manualshive.com logo in svg

R&S SMA100B, User Manual

The R&S SMA100B User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maximizing the potential of your R&S SMA100B. Visit 88.208.23.73:8080 to access the manual and enhance your experience with this exceptional product.

Share
Download
background image

Index

R&S

®

SMA100B

555

User Manual 1178.3834.02 ─ 03

EFC

Activate ..................................................................... 181
Sensitivity ..................................................................181

Electrostatic discharge ...................................................... 20
EMF display

RF level .....................................................................222

EMI suppression ............................................................... 20
Emulating front panel keys ................................................ 61
Emulation

IDN string .................................................................. 262
Language .................................................................. 262
Mode ......................................................................... 262
Set IDN and OPT to default ...................................... 262

Enable

LAN interface ............................................................ 238

ENABle ............................................................................523
Enable registers

Remote ..................................................................... 308

Enter license key ............................................................. 229
Enter password

Setup (security) .................................................237, 239

EOI .................................................................................. 535
Error log .......................................................................... 506
Error messages ............................................................... 503

Adjustment data invalid (183) ................................... 503
Adjustment data missing (182) ................................. 502
Adjustment failed (180) ............................................. 502
Cannot access hardware (200) .................................503
Cannot access the EEPROM (202) .......................... 503
Cannot open file (460) .............................................. 503
Cannot read file (462) ............................................... 503
Cannot write file (461) ...............................................503
Driver initialization failed (204) ..................................503
Extern reference out of range or disconnected (50) . 502
File contains invalid data (465) ................................. 503
Filename missing (463) ............................................ 503
Hardware revision out of date (201) ......................... 503
Invalid EEPROM data (203) ..................................... 503
Invalid filename extension (464) ............................... 503
No current list (241) .................................................. 503
This modulation forces other modulations off (140) .. 502
Unknown list type specified (242) ............................. 503

Error Messages ............................................................... 501

device-specific .......................................................... 502
SCPI ......................................................................... 502

Error queue ..................................................................... 524
Error queue query ........................................... 458, 459, 460
Error queues

recommendations ..................................................... 529

ESD ................................................................................... 20
ESE (event status enable register ) ................................ 525
ESR ................................................................................. 522
ESR (event status register) ............................................. 525
EVENt ............................................................................. 523
Event status enable register (ESE) ................................. 525

Remote ..................................................................... 307

Event status register (ESR) .............................................525

Remote ..................................................................... 307

Exclude frequency ...........................................................199
Exclude level ................................................................... 199
Execute

Single sweep ............................................................ 128
Trigger (list mode) .....................................................134

Expiration date of option ................................................. 500
Export

Execute ....................................................... 94, 137, 158
SCPI ......................................................................... 203

SCPI export .............................................................. 289
SCPI list .................................................................... 288
SCPI settings ............................................................ 288

Export deactivation response .......................................... 230
Export license key ........................................................... 230
Export list files

Basics ................................................................. 91, 155

Express level in

Volts .......................................................................... 433

External frequency

Reference oscillator .................................................. 180

F

Factory

Preset ....................................................................... 193

Factory preset

Change GPIB address .............................................. 273
GPIB address ........................................................... 281

Factory version

Firmware ................................................................... 500

Failure

Network connection .................................................... 27

File

SCPI export .............................................................. 289

File catalog

List mode .................................................................. 135

File exchange .................................................................. 207
File handling .................................................................... 190
File list ............................................................................. 317
File manager ................................................................... 204
File name ........................................................................ 213
File select

Dialog ........................................................................201

File sharing ......................................................................207
File storage location ........................................................ 312
File system ...................................................................... 188

Accessing ................................................................. 207

File transfer ..................................................................... 190

FTP/SAMBA ............................................................. 244
How to .......................................................................207

File type selection ........................................................... 205
Files

User data .................................................................. 188

Fill table

Automatically .............................................. 90, 139, 153
UCOR ....................................................................... 151

Fill with sensor

Basics ....................................................................... 154
Editor .......................................................... 90, 139, 153

Filter

Power sensors .......................................................... 166

Filter length

Auto .......................................................................... 167
User-defiend ............................................................. 167

Finding out the default directory .............................. 189, 312
Firmware

Factory version ......................................................... 500
Min. version .............................................................. 500
Version ......................................................................499

Fixed

Frequency ................................................................... 66

Floating licenses ............................................................. 500
FM ..................................................................................... 74

Deviation ..................................................................... 80
Mode ........................................................................... 81

Summary of Contents for SMA100B






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SMA100B

Teac UD-301 Owner'S Manual preview
UD-301
Brand: Teac Pages: 48
JED 103 Installation And Operation Manual preview
103
Brand: JED Pages: 4
Xantrex SW Series Owner'S Manual preview
SW Series
Brand: Xantrex Pages: 152
NAD M12 Owner'S Manual preview
M12
Brand: NAD Pages: 22
A-iPower AP4000 Quick Start Manual preview
AP4000
Brand: A-iPower Pages: 2
A-Designs REDDI Owner'S Manual preview
REDDI
Brand: A-Designs Pages: 7
Samson 6134 Mounting And Operating Instructions preview
6134
Brand: Samson Pages: 58
Ginlong Solis-100K-HV-5G Installation And Operation Manual preview
Solis-100K-HV-5G
Brand: Ginlong Pages: 28
Wagan SmartAC 425W User Manual preview
SmartAC 425W
Brand: Wagan Pages: 44
B&B Electronics RS-232 to Ethernet Converter ES1A Product Manual preview
RS-232 to Ethernet Converter ES1A
Brand: B&B Electronics Pages: 54
Ross GearLite FDB-9649-LC User Manual preview
GearLite FDB-9649-LC
Brand: Ross Pages: 22
YOKOGAWA Exaxt450 User Manual preview
Exaxt450
Brand: YOKOGAWA Pages: 84
HEIDENHAIN RON 785 Mounting Instructions preview
RON 785
Brand: HEIDENHAIN Pages: 16
D&H FH16A Manual preview
FH16A
Brand: D&H Pages: 106
Speeka F10F Series User Manual preview
F10F Series
Brand: Speeka Pages: 18
axing MIE 3-02 Manual preview
MIE 3-02
Brand: axing Pages: 138
Monoprice 39263 User Manual preview
39263
Brand: Monoprice Pages: 13
Eaton 12-110-1250-Bxy Operation And Installation Manual preview
12-110-1250-Bxy
Brand: Eaton Pages: 31

Brands by name

Popular brands

Load more brands