manualshive.com logo in svg

R&S SMA100B, User Manual

The R&S SMA100B User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maximizing the potential of your R&S SMA100B. Visit 88.208.23.73:8080 to access the manual and enhance your experience with this exceptional product.

Share
Download
background image

Index

R&S

®

SMA100B

563

User Manual 1178.3834.02 ─ 03

Service manual ................................................................. 17
Service request (SRQ) ............................................ 524, 527
Service request enable register (SRE) ............................524

Remote ..................................................................... 310

Services

LAN ........................................................................... 238

Set IDN and OPT to default

Emulation mode ........................................................ 262

Set up remote control

GPIB ......................................................................... 281

Setting characteristics

RF level .......................................................................70

Setting commands .......................................................... 508
Settings

Active connections .................................................... 263
ALC ........................................................................... 147
Attenuator ................................................................. 144
Automatic level control ..............................................147
Check front panel ......................................................491
Display ...................................................................... 219
Instrument emulations .............................................. 261
Internal adjustments ................................................. 494
Keyboard .................................................................. 219
List mode .................................................................. 131
Managing .................................................................. 188
NRP power viewer .................................................... 163
NRP sensor mapping ................................................160
On power-on ............................................................. 221
Protection ..................................................................233
Remote access ......................................................... 255
RF level .......................................................................67
SCPI export .............................................................. 288
Security ..................................................................... 234
UCOR ....................................................................... 149
Undo/Redo ................................................................242

Setup

Accept security settings .................................... 238, 239
Adjusting display ....................................................... 218
Adjusting keyboard ................................................... 218
Annotation frequency ................................................ 235
Annotation level ........................................................ 235
Appearance .............................................................. 218
Bluetooth (password management ) ......................... 241
Change password ..................................................... 241
Change password (security) ..................................... 241
Confirm password ..................................................... 241
Confirm password (security) ..................................... 241
Display ...................................................................... 219
Display lock ...............................................................236
Display settings .........................................................219
Enter password (security) ................................. 237, 239
GUI update ............................................................... 218
Keyboard .................................................................. 219
Keyboard settings ..................................................... 219
Layout (keyboard) ..................................................... 220
New password .......................................................... 241
New password (security) .......................................... 241
Old password (security) ............................................ 241
Password (protection) ............................................... 234
Performing the front panel test ................................. 492
Protection ..................................................................232
Protection level ......................................................... 234
Screen saver .............................................................219
Security ..................................................................... 232
Security password .................................................... 241
USB storage (security) ..............................................234
User name (security) ................................................ 240

User password .......................................................... 240
Wait time ................................................................... 219

Shape

LF generator ............................................................... 97
LF output .....................................................................97
Period ......................................................................... 98
Pulse duty cycle .......................................................... 99
Pulse width ................................................................. 99
Sweep ....................................................................... 126
Trapeze high ............................................................... 99
Trapezoid rise, fall ...................................................... 99
Triangle rise ................................................................ 99

Show file content

SCPI export .............................................................. 290

Show SCPI command ..................................................... 287

Close .........................................................................287
Copy ......................................................................... 287

Shutting down ................................................................... 24
Signal output

LF ..............................................................................102

Signal source

Analog modulation ...................................................... 74

Single

Execute (list mode) ................................................... 134

SMB (Samba)

LAN services .............................................................238

Softkey bar

see Taskbar ................................................................ 54

Source

AM, FM, ΦM ............................................................... 80
Analog modulation ...................................................... 74
LF output ...................................................................103
Power sensors .......................................................... 166
PULM .......................................................................... 78
Pulse modulation ........................................................ 78
Reference oscillator .................................................. 180
Sweep trigger ............................................................125

Source subsystem

Remote control commands ....................................... 364

Spacing

Frequency sweep ............................................. 127, 129
Level sweep .............................................................. 130

Span

Frequency sweep ..................................................... 129

SRE ................................................................................. 522
SRE (service request enable register) ............................ 524
SRQ ................................................................................ 535
SRQ (service request) .............................................524, 527
SSH

LAN services .............................................................238

Standby ....................................................................... 23, 35
Start

Frequency sweep ..................................................... 129
Level sweep .............................................................. 130
Power sensors .......................................................... 165

Starting .............................................................................. 23
State

Adjustment (reference oscillator) .............................. 183
ALC ........................................................................... 147
AM, FM, ΦM ............................................................... 79
Automatic level control ..............................................147
Clock synthesis ......................................................... 185
DC offset ................................................................... 186
LF frequency sweep ........................................... 97, 124
List mode .................................................................. 132
Power sensors .......................................................... 165
PULM .......................................................................... 77

Summary of Contents for SMA100B






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SMA100B

Midian VAE-1-VX1 Manual preview
VAE-1-VX1
Brand: Midian Pages: 28
M-Audio Portman 4x4 Manual preview
Portman 4x4
Brand: M-Audio Pages: 45
Zamp Solar ZS-8AW User Manual preview
ZS-8AW
Brand: Zamp Solar Pages: 7
Blackmagicdesign Teranex Mini IP Video 12G Installation And Operation Manual preview
Teranex Mini IP Video 12G
Brand: Blackmagicdesign Pages: 22
Audio Technica AT-DAC100 User Manual preview
AT-DAC100
Brand: Audio Technica Pages: 11
Kostal PIKO MP plus Installation Manual preview
PIKO MP plus
Brand: Kostal Pages: 12
Lika EMC58 MT User Manual preview
EMC58 MT
Brand: Lika Pages: 104
Enerdrive EPC 1600-12 Owner'S Manual preview
EPC 1600-12
Brand: Enerdrive Pages: 48
Samlexpower PST-600-12 Owner'S Manual preview
PST-600-12
Brand: Samlexpower Pages: 48
AEG ID ARE i5 Instruction Manual preview
ARE i5
Brand: AEG ID Pages: 20
Wellav SMP181-HLS User Manual preview
SMP181-HLS
Brand: Wellav Pages: 24
Daktronics ED-14743 Manual preview
ED-14743
Brand: Daktronics Pages: 21
Telwin TECHNOLOGY TIG 172 Troubleshooting And Repair Manual preview
TECHNOLOGY TIG 172
Brand: Telwin Pages: 29
Lenz Digital Plus SILVER Series Operating Manual preview
Digital Plus SILVER Series
Brand: Lenz Pages: 50
Mastervolt MASS COMBI PRO 12/3000-150 User And Installation Manual preview
MASS COMBI PRO 12/3000-150
Brand: Mastervolt Pages: 28
Asus Essence 3 User Manual preview
Essence 3
Brand: Asus Pages: 18
Asus Essence One Series User Manual preview
Essence One Series
Brand: Asus Pages: 32
Ask Technology HDCN0012M1 User Manual preview
HDCN0012M1
Brand: Ask Technology Pages: 7

Brands by name

Popular brands

Load more brands