Improving Level Performance
R&S
®
SMA100B
150
User Manual 1178.3834.02 ─ 03
4. Select "State > On".
The "UCOR" dialog contains all settings for creating and handling files with user-
defined level correction values.
The remote commands required to define these settings are described in
ter 12.15.2, "SOURce:CORRection Subsystem"
Settings
State
Activates user correction.
You recognize that user correction is enabled by the status indication "Lev Ucor" in the
"Level" panel.
Remote command:
[:SOURce<hw>]:CORRection[:STATe]
User Correction
Indicates the current value for level correction.
Remote command:
[:SOURce<hw>]:CORRection:VALue?
UCOR Data
Accesses the standard "File Select" function of the instrument. The provided navigation
possibilities in the dialog are self-explanatory.
Files with user correction values are files with predefined file extension
*.ucor
. When
a file is selected, the dialog indicates the filename.
You can create the file internally in the table editor or externally.
●
To select an existing file, select "Select List > navigate to the file *.ucor > Select"
User Correction
