Improving Level Performance
R&S
®
SMA100B
153
User Manual 1178.3834.02 ─ 03
Fill with Sensor ← Data handling keys
In "UCOR" mode, opens a dialog to configure the settings for automatic filling of user
correction data with an R&S NRP power sensor
See
Chapter 6.3.3, "Fill with Sensor"
Save As/Save ← Data handling keys
Stores the list in a file with user-defined name and predefined file extension. To save a
copy or create a file, use the "Save as" function.
Fill Table Automatically
Provides parameters for filling a table automatically with user-defined values.
The settings are interdependent; the affected parameters change accordingly if you set
a value.
To fill the table, select "Fill".
Note:
Save a list only after filling all columns and rows, otherwise the entries are lost.
"From / Range"
Defines the start line and number of the row to be filled.
"Select Column to Fill"
Selects the respective value, including the unit.
"Start / End Value"
Provides the default values corresponding to the selected column.
"Increment"
Determines the step size.
"Fill"
Fills the table.
Fill both columns and then save the list. Otherwise the entries are
lost.
User Correction
