File and Data Management
R&S
®
SMA100B
193
User Manual 1178.3834.02 ─ 03
Mark / Do not mark parameters changed from preset
To survey the current state of the settings concerning default values, the
R&S
SMA100B offers a feature that visually identifies deviations from the default val-
ues.
For more information, see
Chapter 9.2.2, "How to Identify Parameters Which Are Not in
9.2.1 Preset, Set to Default and Factory Preset Settings
...............................................................................................193
Preset
Resets all parameters and switching states, and closes all opened dialogs.
Consider also the following possibilities:
●
You can define the settings that are restored when you preset the instrument
(see
Chapter 9.2.3, "How to Recall User Settings Automatically after Preset"
●
You can reset the instrument to the factory state
(see
See also
that contains the key parameters that are reset by the correspond-
ing preset functions.
Remote command:
Set To Default
Resets the associated settings of the corresponding dialog or tab.
Preset this Parameter
Restores the default value of a single parameter.
Execute Factory Preset
Resets the instrument to its factory settings.
Note:
"Factory Preset" retains all security settings and does not delete any user files
like setups or user data.
See also
that contains the key parameters that are reset by the correspond-
ing preset functions.
Remote command:
Restoring the (Default) Instrument Configuration
