File and Data Management
R&S
®
SMA100B
199
User Manual 1178.3834.02 ─ 03
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions
●
To access the general data list editor, use the
(see also
●
To perform standard file management functions, like create directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
Chapter 9.8, "Using the File Manager"
Remote command:
To list all files in a directory:
[:SOURce]:CORRection:CSET:CATalog?
Recent files
Displays the files last used.
Save
Saves the current instrument settings or the settings belonging to a digital standard
under the defined filename.
Remote command:
Save Immediate x
Stores the current instrument setting in one of the intermediate memories.
These instrument settings are retained until a different instrument setting is stored in
the intermediate memory. When the instrument is switched off, the contents of the
intermediate memories are retained.
Remote command:
Exclude Frequency
The current frequency is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:FREQuency[:CW|FIXed]:RCL
Exclude Level
The current level is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:RCL
Recall
Restores the selected configuration.
Saving and Recalling Instrument Settings
