File and Data Management
R&S
®
SMA100B
211
User Manual 1178.3834.02 ─ 03
A log-on dialog opens and requests a user name and a password.
The default user name and password is
instrument
.
Tip:
Default password
The FTP and SAMBA file access use the user "instrument" with default password
"instrument".
We recommend that you change this password in the "Setup > Security > Pass-
word Management > Change User Password" dialog before connecting the instru-
ment to the network.
See
Chapter 10.4.4, "Password Management"
4. Enter the user name and the password of your instrument.
The
/var/user/share
directory of the instrument is mapped to and displayed as
a network drive of the remote PC.
You can access the files in the
/var/user
directory, perform standard function
like creating directory, or storing files.
9.9.4 Using a USB Storage Device for File Transfer
Alternatively to the file transfer possibility via LAN, you can use a USB storage device
for direct file transfer from and to the instrument.
We recommend that you transfer files with user data (like lists or instrument setup files)
to the instrument, rather than load and play them from a connected USB storage
device.
To transfer a file with user data to the instrument
1. Connect a USB storage device, for example a USB memory stick to one of the
USB interfaces of the instrument.
The R&S
SMA100B recognizes the connected USB storage device automatically.
2.
3.
Enable write permission on the file system
4. Select "System Config > Save/Recall".
The dialog displays the
/var/user
directory and the
/usb
drive.
5. In the "Save/Recall" dialog, select "File Manager".
6. In the directory tree, navigate to the
/usb
drive.
Select the required file with user data.
How to Transfer Files from and to the Instrument
