General Instrument Functions
R&S
®
SMA100B
233
User Manual 1178.3834.02 ─ 03
–
Sanitizing
that prevents the instrument from leaving a secure environment with
stored user information.
–
Annotation
frequency and amplitude prevent reading the display.
To access the settings of these topics, see
Chapter 10.4.2, "Setting Security
●
Password
management secures controlled user access to the instrument
With the two-step password concept, you can assign a user-defined password for
the operating system, and a security password for accessing the mass storage of
the instrument.
See also
Chapter 10.4.2, "Setting Security Parameters"
●
LAN services
secure controlled network access
You can individually lock and unlock the supported LAN interface services, see
Chapter 10.4.3, "Configuring LAN Services"
Remote control via LAN interface requires that the interface is activated, but you
can enable the required services specifically.
●
User interface
prevents front panel operation and/or reading the display.
For more information, see the document R&S
SMA100B Instrument Security Proce-
dures.
10.4.1 Protection Level Settings
Access:
► Select "System Config > Setup > Security > Protection".
The "Protection" dialog provides access to the unlocking of different protection lev-
els.
Several functions in the instrument are password-protected to prevent for example
accidental changes,
Managing the Security Settings
