Network Operation and Remote Control
R&S
®
SMA100B
263
User Manual 1178.3834.02 ─ 03
In addition to the preset values, you can define your own identification string so that
each generator uses an individual identification, like
My_SigGen
for instance.
Remote command:
OPT String
Indicates the option string of the instrument as queried with common command
*OPT?
.
In "Mode > User Defined", you can define your own option string, additionally to the
automatically created one.
Remote command:
11.4.6 Active Connections Settings
Access:
► Select "System Config > Remote Access > Active Connections".
The "Active Connections" dialog indicates all active SCPI and TCP/IP connections.
Show Remote Connections in Taskbar
Displays the currently active connections in the taskbar.
SCPI Connections
Shows the active VISA resource string of the interface via which the instrument is
remotely controlled.
Remote Access Settings
