Remote-Control Commands
R&S
®
SMBVB-K548
20
User Manual 1179.0922.02 ─ 01
Parameters:
<ArbCfrSignalBw>
float
Range:
0 to depends on the sample rate of the loaded file
Increment: 0.1
*RST:
250E6
Example:
See
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:CFR:SFReq
<ArbCfrStopBFreq>
Sets the stopband frequency of the filter, if
[:SOURce<hw>]:BB:ARBitrary:CFR:
is set to
ENHanced
. Frequency components higher than the stopband fre-
quency are filtered out by the lowpass filter.
Parameters:
<ArbCfrStopBFreq> float
Range:
0 to depends on the sample rate of the loaded file
Increment: 0.1
*RST:
250E6
Example:
See
Example "Setting up an Enhanced Filter"
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:CFR:WAVeform:CREate
<CreateWvFile>
With enabled signal generation, triggers the instrument to store the current settings in a
waveform file. Waveform files can be further processed.
The filename and the directory it is stored in are user-definable; the predefined file
extension for waveform files is
*.wv
.
Setting parameters:
<CreateWvFile>
string
Example:
See
Usage:
Setting only
Manual operation:
See
