Remote-Control Commands
R&S
®
SMBVB-K548
16
User Manual 1179.0922.02 ─ 01
Example: Configuring the CFR
Prerequisite: An ARB file is loaded and enabled.
SOURce1:BB:ARBitrary:CFR:ALGorithm CLFiltering
SOURce1:BB:ARBitrary:CFR:DCFDelta -3
SOURce1:BB:ARBitrary:CFR:ITERations 5
SOURce1:BB:ARBitrary:CFR:FILTer SIMPle
SOURce1:BB:ARBitrary:CFR:CSPacing 20E6
SOURce1:BB:ARBitrary:CFR:SBANdwidth 18E6
SOURce1:BB:ARBitrary:CFR:STATe ON
SOURce1:BB:ARBitrary:CFR:MEASure:STATe?
//ON
SOURce1:BB:ARBitrary:CFR:OCFactor?
//6
SOURce1:BB:ARBitrary:CFR:RCFactor?
//3
SOURce1:BB:ARBitrary:CFR:CREate "cfr"
Example: Setting up an Enhanced Filter
SOURce1:BB:ARBitrary:CFR:FILTer ENHanced
SOURce1:BB:ARBitrary:CFR:PFReq 9E6
SOURce1:BB:ARBitrary:CFR:SFReq 11E6
SOURce1:BB:ARBitrary:CFR:FORDer 100
The following commands specific to the R&S
SMBVB-K548 option are described here:
[:SOURce<hw>]:BB:ARBitrary:CFR[:STATe]
....................................................................... 16
[:SOURce<hw>]:BB:ARBitrary:CFR:ALGorithm
...................................................................17
[:SOURce<hw>]:BB:ARBitrary:CFR:CSPacing
.................................................................... 17
[:SOURce<hw>]:BB:ARBitrary:CFR:DCFDelta
.................................................................... 17
[:SOURce<hw>]:BB:ARBitrary:CFR:FILTer
......................................................................... 17
[:SOURce<hw>]:BB:ARBitrary:CFR:FORDer
...................................................................... 18
[:SOURce<hw>]:BB:ARBitrary:CFR:ITERations
.................................................................. 18
[:SOURce<hw>]:BB:ARBitrary:CFR:MEASure[:STATe]?
.......................................................18
[:SOURce<hw>]:BB:ARBitrary:CFR:OCFactor?
...................................................................18
[:SOURce<hw>]:BB:ARBitrary:CFR:PFReq
........................................................................ 19
[:SOURce<hw>]:BB:ARBitrary:CFR:RCFactor?
...................................................................19
[:SOURce<hw>]:BB:ARBitrary:CFR:SBANdwidth
................................................................ 19
[:SOURce<hw>]:BB:ARBitrary:CFR:SFReq
........................................................................ 20
[:SOURce<hw>]:BB:ARBitrary:CFR:WAVeform:CREate
....................................................... 20
[:SOURce<hw>]:BB:ARBitrary:CFR[:STATe]
<ArbCfrState>
Enables the crest factor reduction calculation.
Parameters:
<ArbCfrState>
0 | 1 | OFF | ON
*RST:
0
Example:
See
Manual operation:
See