DVB-C configuration and settings
R&S
®
SMCVB-K157
11
User Manual 1179.4686.02 ─ 01
Parameter
Value
State
Not affected by the "Set to Default"
Remote command:
Save/Recall
Accesses the "Save/Recall" dialog, that is the standard instrument function for saving
and recalling the complete dialog-related settings in a file. The provided navigation
possibilities in the dialog are self-explanatory.
The settings are saved in a file with predefined extension. You can define the filename
and the directory, in that you want to save the file.
See also, chapter "File and Data Management" in the R&S
SMCV100B user manual.
Remote command:
[:SOURce<hw>]:BB:DVBC:SETTing:LOAD
[:SOURce<hw>]:BB:DVBC:SETTing:STORe
[:SOURce<hw>]:BB:DVBC:SETTing:DELete
[:SOURce<hw>]:BB:DVBC:SETTing:CATalog?
3.2
Input Signal settings
Access:
► Select "Baseband > DVB-C > Input Signal".
The dialog provides settings to configure the input signal.
Most broadcast standards share the following parameters, i.e. they have the same set-
ting independent from the standard:
●
"Source"
●
"Input"
●
"IP TS Channel"
Settings:
................................................................................................. 16
...............................................................................................17
Input Signal settings
