Remote-Control Commands
R&S
®
SMCVB-K164
79
User Manual 1179.0974.02 ─ 02
6.1
General Commands
Example: Storing current configuration
:SOURce1:BB:T2DVb:SETTing:STORe "/var/user/my_T2DVb"
// Stores the file "my_T2DVb.T2DVb" in the directory as above.
*RST
:SOURce1:BB:T2DVb:SETTing:CATalog?
// Response: "my_T2DVb"
:SOURce1:BB:T2DVb:SETTing:LOAD "/var/user/my_T2DVb"
:SOURce1:BB:T2DVb:STATe 1
:SOURce1:BB:T2DVb:SETTing:DELete "my_T2DVb"
Commands
.................................................................................. 79
.....................................................................................79
[:SOURce<hw>]:BB:T2DVb:SETTing:CATalog?
...................................................................80
[:SOURce<hw>]:BB:T2DVb:SETTing:DELete
......................................................................80
[:SOURce<hw>]:BB:T2DVb:SETTing:LOAD
........................................................................80
[:SOURce<hw>]:BB:T2DVb:SETTing:STORe
......................................................................80
[:SOURce<hw>]:BB:T2DVb:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:T2DVb:STATe
.
Example:
See
Example "Storing current configuration"
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:STATe
<State>
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
See
Example "Storing current configuration"
Manual operation:
See
General Commands
