DVB-S Configuration and Settings
R&S
®
SMCVB-K167
15
User Manual 1179.1058.02 ─ 02
Stuffing
Requires "Source > External/TS Player".
Activates stuffing.
"On"
The installed input interface provides the transport stream data rate
required for the current modulation parameters (regardless of the
input data rate of the external transport stream).
"Off"
The data rate of the transport stream source must match the data
rate required for the current modulation parameters.
The value equals the
Remote command:
[:SOURce<hw>]:BB:DVBS:STUFfing
Test Signal
Requires "Source > Test Signal".
Defines the test signal data.
The data consists of test
packets.
"Test TS Packet"
Standardized packet data used as modulation data in the transport
stream. To configure the packet structure, select the side tab "Test
Signal > Test TS Packet".
See also
"PRBS before Conv. Enc."
Pure pseudo-random bit sequence (PRBS) data used as modulation
data with no packet structure. The sequence is inserted before the
convolutional encoder. PRBS data conforms with
fication.
To configure the PRBS type, select the side tab "Test Signal >
PRBS". See also
Remote command:
[:SOURce<hw>]:BB:DVBS:TESTsignal
Input Signal Settings