DVB-S Configuration and Settings
R&S
®
SMCVB-K167
32
User Manual 1179.1058.02 ─ 02
PID Test Packet
If a header is present in the test packet ("Test TS Packet > Head/184 Payload"), you
can specify a fixed or variable packet identifier (PID).
"Null"
The header of the test transport stream packets has a fixed setting of
null packet header 1FFF (hex).
"Variable"
Uses the header value defined with
.
Remote command:
PID (Hex)
.
If "PID Test Packet > Null", "PID (Hex) = 1FFF" is fixed.
If "PID Test Packet > Variable", you can edit the value.
Remote command:
Payload Test/Stuff
Defines the payload area content of the
packet.
"PRBS"
See also chapter "Internal Modulation Data" in the R&S
SMCV100B
User Manual.
"0x00"
Exclusively 00 (hex) data
"0xFF"
Exclusively FF (hex) data
Remote command:
PRBS
Sets the length of the PRBS sequence.
You can select a PRBS 15 or a PRBS 23 sequence as specified by
Remote command:
:TSGen:CONFigure:PRBS[:SEQuence]
4.6.3
Seamless Loop Settings
Displaying the tab requires a
*.trp
,
*.trp_c
,
*.emc
or
*.emc_c
file loaded into the
"TS Player" dialog.
*.trp
files are previously recorded files.
TS Player