Remote-Control Commands
R&S
®
SMCVB-K167
45
User Manual 1179.1058.02 ─ 02
6.1
General Commands
................................................................................... 45
......................................................................................45
[:SOURce<hw>]:BB:DVBS:SETTing:CATalog?
....................................................................45
[:SOURce<hw>]:BB:DVBS:SETTing:DELete
.......................................................................45
[:SOURce<hw>]:BB:DVBS:SETTing:LOAD
.........................................................................46
[:SOURce<hw>]:BB:DVBS:SETTing:STORe
.......................................................................46
[:SOURce<hw>]:BB:DVBS:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:DVBS:STATe
.
Setting parameters:
<Preset>
select
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:STATe
<State>
Enables/disables the DVB-S standard.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion
*.dvbs
.
Return values:
<Catalog>
<filename1>,<filename2>,...
Returns a string of filenames separated by commas.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:SETTing:DELete
<Delete>
Deletes the selected file from the default or the specified directory. Deleated are files
with extension
*.dvbs
.
General Commands
