Remote-Control Commands
R&S
®
SMCVB-K167
47
User Manual 1179.1058.02 ─ 02
[:SOURce<hw>]:BB:DVBS:SOURce
<InpSigSource>
Parameters:
<InpSigSource>
EXTernal | TSPLayer | TESTsignal
*RST:
EXTernal
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:INPut
<InpSigInput>
Sets the external input.
Parameters:
<InpSigInput>
TS | IP
*RST:
TS
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:INPut:FORMat
<InpSigFormat>
Sets the format of the "TS IN" input signal.
Parameters:
<InpSigFormat>
ASI | SMPTE
*RST:
ASI
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:INPut:TSCHannel
<InpSigTSChannel>
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS
channels as input at the "IP Data" interface.
To configure a particular channel, see
Chapter 4.2.4, "IP Channnel x Settings"
For configuring IP channel settings and local IP data network parameters, see:
●
●
Parameters:
<InpSigTSChannel> 1 | 2 | 3 | 4
*RST:
1
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:STUFfing
<InpSigStuffing>
Activates stuffing.
Input Signal Commands