Remote-Control Commands
R&S
®
SMCVB-K167
48
User Manual 1179.1058.02 ─ 02
Parameters:
<InpSigStuffing>
0 | 1 | OFF | ON
*RST:
1
Manual operation:
See
6.2.2
Info Commands
[:SOURce<hw>]:BB:DVBS:PACKetlength?
......................................................................... 48
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]?
....................................................................... 48
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]:MAX?
............................................................... 48
[:SOURce<hw>]:BB:DVBS[:INPut]:DATarate?
..................................................................... 49
[:SOURce<hw>]:BB:DVBS:PACKetlength?
Queries the packet length of the external transport stream in bytes.
Return values:
<InpSigPLength>
P188 | Invalid | P204
P188|P204
188/208 byte packets specified for serial input and parallel input.
INValid
Packet length does not match the specified length.
*RST:
INValid
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]?
Displays the data rate of the useful data that is present in the transport stream at the
transport stream input interface selected to supply the modulation data. This is a mea-
sured value.
Return values:
<InpSigUsefull>
float
Range:
0 to 999999999
Increment: 0.001
*RST:
0
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]:MAX?
Displays the transport stream data rate that is derived from the current modulation
parameter settings and is required by the modulator at the input.
Input Signal Commands