Remote-Control Commands
R&S
®
SMCVB-K167
49
User Manual 1179.1058.02 ─ 02
For "Stuffing > On", the value indicates the maximum useful data rate (payload) that is
allowed in the transport stream.
Return values:
<InpSigMaxRate>
float
Range:
0 to 999999999
Increment: 0.000001
*RST:
0
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:DVBS[:INPut]:DATarate?
Displays the current data rate of the external transport stream applied at the transport
stream input interface (useful data rate + "null packets").
Return values:
<InpSigDatarate>
float
Range:
0 to 999999999
Increment: 0.001
*RST:
0
Usage:
Query only
Manual operation:
See
6.2.3
Test Signal Commands
[:SOURce<hw>]:BB:DVBS:TESTsignal
...............................................................................49
[:SOURce<hw>]:BB:DVBS:TSPacket
................................................................................. 49
..................................................................................50
..........................................................................................50
[:SOURce<hw>]:BB:DVBS:PIDTestpack
.............................................................................50
...................................................................................... 50
[:SOURce<hw>]:BB:DVBS:TESTsignal
<InpSigTestSig>
Parameters:
<InpSigTestSig>
TTSP | PBEC
*RST:
TTSP
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:TSPacket
<SetTSPacket>
Specifies the structure of the test transport stream packet that is fed to the modulator.
Input Signal Commands