Remote-Control Commands
R&S
®
SMCVB-K167
53
User Manual 1179.1058.02 ─ 02
MULTicast
When an IP address is in the multicast address range, an
attempt is made to join a multicast group using
cast address and port.
See:
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
*RST:
UNIcast
Example:
See
Example "Configure IP channel 2 properties"
Manual operation:
See
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
Sets the destination IP address (IPv4) of the IP connection.
Parameters:
<Address>
string
Range:
224.0.0.0 to 239.255.255.255
Example:
See
Example "Configure IP channel 2 properties"
Manual operation:
See
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:ADDRess
Specifies the IGMP source address of the network.
Parameters:
<Address>
string
Example:
See
Example "Configure IP channel 2 properties"
Manual operation:
See
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:PING
Triggers pinging of the IGMP source address in the local IP data network. Query the
result via
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
Example:
See
Example "Configure IP channel 2 properties"
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
Queries the result of pinging the
source address.
Input Signal Commands