DVB-S Configuration and Settings
R&S
®
SMCVB-K167
22
User Manual 1179.1058.02 ─ 02
If "Ping Result > Ping: Transmit Failed. xxx", the source address is not available in the
network. "xxx" can be, e.g. "General Failure". Try another "IGMPv3 Source Address".
Remote command:
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
Local IP Data Network
Accesses local IP data network settings, see
Chapter 4.7, "Local IP Data Network Set-
4.3
Coding Settings
Access:
► Select "Baseband > DVB-S / DVB-S2 > Coding".
The tab provides settings for coding.
Settings:
Symbol Rate
Sets the symbol rate.
In the transmission spectrum, the symbol rate represents the 3
dB bandwidth.
Remote command:
Constellation
Defines the constellation.
Coding Settings