Remote-Control Commands
R&S
®
SMCVB-K167
50
User Manual 1179.1058.02 ─ 02
Parameters:
<SetTSPacket>
H184 | S187
*RST:
H184
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:PAYLoad
<SetPayload>
Sets the payload area content of the transport stream packet.
Parameters:
<SetPayload>
PRBS | H00 | HFF
*RST:
PRBS
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:PID
<SetPID>
Sets/querries the packet identifier (PID).
Set/query individual PID values for variable PID test packets or query a fixed PID value
1FFF
for null PID test packets.
Parameters:
<SetPID>
integer
Range:
0 to 8191
*RST:
8191
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:PIDTestpack
<SetPIDTestpack>
Parameters:
<SetPIDTestpack>
NULL | VARiable
*RST:
NULL
Manual operation:
See
[:SOURce<hw>]:BB:DVBS:PRBS
<SetPRBS>
Sets the period length of the PRBS generator which fills the payload area of the trans-
port stream packet (test signal or null packet).
Parameters:
<SetPRBS>
P23_1 | P15_1
*RST:
P23_1
Manual operation:
See
Input Signal Commands
