Remote-Control Commands
R&S
®
SMCVB-K167
64
User Manual 1179.1058.02 ─ 02
Suffix
Value range
Description
BCIP<hw>
1
Available local IP LAN interfaces
Example: Retrieving information on local network-related settings
//******************************************************************************
// Monitor IP interface 1 local network status.
//******************************************************************************
SYSTem:COMMunicate:BCIP1:NETWork:STATus?
// Response: "0"
// The instrument is diconnected from the local IP network.
SYSTem:COMMunicate:BCIP1:NETWork:RESTart
SYSTem:COMMunicate:BCIP1:NETWork:STATus?
// Response: "1"
//******************************************************************************
// Query local IP data network properties.
//******************************************************************************
SYSTem:COMMunicate:BCIP1:NETWork:COMMon:HOSTname?
// Response: "SMCV100B-123456-IP-Data"
SYSTem:COMMunicate:BCIP1:NETWork:IPADdress:MODE STAT
SYSTem:COMMunicate:BCIP1:NETWork:IPADdress "10.113.0.104"
SYSTem:COMMunicate:BCIP1:NETWork:IPADdress:SUBNet:MASK "255.255.252.0"
SYSTem:COMMunicate:BCIP1:NETWork:MACaddress?
// Response: "00 90 B8 21 89 F8"
SYSTem:COMMunicate:BCIP1:NETWork:PROTocol?
// Response: "UDP"
:SYSTem:COMMunicate:BCIP<hw>:NETWork:COMMon:HOSTname
................................... 64
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress
....................................................65
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:MODE
......................................... 65
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:SUBNet:MASK
............................. 65
:SYSTem:COMMunicate:BCIP<hw>:NETWork:MACaddress
................................................ 65
:SYSTem:COMMunicate:BCIP<hw>:NETWork:PROTocol
.................................................... 66
:SYSTem:COMMunicate:BCIP<hw>:NETWork:RESTart
.......................................................66
:SYSTem:COMMunicate:BCIP<hw>:NETWork:STATus
........................................................66
:SYSTem:COMMunicate:BCIP<hw>:NETWork:COMMon:HOSTname
<Hostname>
Sets an individual hostname for the vector signal generator.
Note:
We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
Parameters:
<Hostname>
string
Example:
See
Example "Retrieving information on local network-related
Manual operation:
See
BCIP Subsystem