Getting Started
Satellite Navigation
32
User Manual 1178.6379.02 ─ 01
Settings:
..........................................................................................32
..................................................................................... 33
Elevation/Azimuth > System, SV-ID
..............................................................................34
Display Type
Switches between the available views.
See
Chapter 5.3, "Simulation Monitor"
Remote command:
n.a.
Config
Accesses the dialogs with corresponding settings:
●
For "Display > Satellites", see
Chapter 8.2, "Satellites Settings"
●
For "Display > Receiver", see
Chapter 7, "Receiver Type and Position"
Real-time information
You find dynamic information on several parameters in most of the views.
Monitored are the following parameters:
P, V, T ← Real-time information
Summary information on:
●
P: receiver position
Resumes the same information as the one displayed for
●
V: velocity
Resumes the same information as the one displayed for
●
T: date and time in UTC format (DD.MM.YYY HH:MM:SS)
SV/ HDOP / PDOP ← Real-time information
Displays the current HDOP and PDOP value of the selected satellite constellation and
the SV these values apply to.
The HDOP and PDOP can be used as an indication of 2D and 3D positioning quality.
The general rule here is that the smaller the HDOP and PDOP are, the better the preci-
sion of the position fix.
Location ← Real-time information
Displays the current location of the receiver in decimal format.
Simulation Monitor