SBAS Corrections
Satellite Navigation
144
User Manual 1178.6379.02 ─ 01
Parameter
Remote command:
Reference Date
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:DATE
Reference Time
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:TIME
X
G
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XN
Y
G
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YN
Z
G
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZN
X
G
Rate of Change
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XDN
Y
G
Rate of Change
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YDN
Z
G
Rate of Change
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZDN
X
G
Acceleration
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XDDN
Y
G
Acceleration
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YDDN
Z
G
Acceleration
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZDDN
Simulated Clock
Comprises the parameters of the EGNOS, WAAS, MSAS satellites.
Parameter
Remote command:
Reference Date
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:DATE
Reference Time
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:TIME
a
Gf0
, a
Gf1
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:AF<s2us0>
13.4.2.2
Broadcasted Orbit, Clock and Time Conversion Settings
Access:
1. Select "System Configuration > Systems&Signals > SBAS (e.g. EGNOS) > On".
2. Select "Satellites > SBAS > Error Correction Mode > Replay Historical Data (and
Sync Atmosphere & SV Errors)".
3. Select "SV# > SV Config > Signals Configuration".
SBAS Settings