Assistance Data Generation
Satellite Navigation
180
User Manual 1178.6379.02 ─ 01
16 Assistance Data Generation
Access:
1. Select "GNSS > Data Generation > Assistance Data Generation".
2. Set the "Assistance Mode" and the "Assistance Data Generation".
3. Select "Synchronize".
Relevant settings, like active satellites, receiver location or timing information are
retrieved automatically but can subsequently change them.
With the provided settings, you can generate assistance data files for Assisted-
GNSS testing.
In a test setup with a protocol tester and a DUT, the generated assistance data
files can be formatted into mobile communication's message formats. These files
can be used to accelerate the time to first fix (TTFF).
Settings:
.............................................................................................. 181
............................................................................................. 181
........................................................................................ 182
........................................................................................... 182
............................................................................................... 182
................................................................................................182